For loosening and tightening drain and supply connections. We carry 14-inch and 18-inch models.
Bathtub installation longview WA built to last
When you need bathtub installation longview WA homeowners trust, our team handles everything from removing the old tub to sealing the new one. We work with cast iron, acrylic, and walk-in models, and we know the quirks of Longview's older homes.
Serving longview and nearby areas.
How big is the job?
Swap and repair
New tub plus minor subfloor or valve work.
- 1. Swap only Same size tub, same drain location, no floor repair.
- 2. Swap and repair New tub plus minor subfloor or valve work.
- 3. Full remodel Tub, tile, drain move, and fixture upgrades planned in writing first.
Drag the needle to compareTouch and drag the needle
- 30Services from one local team
- 20Areas served around longview
- Measure twiceWe check the alcove before ordering.
- Test fillWe fill and check for leaks.
What our bathtub installation includes
Every tub install is different, but here's what we typically cover.
Work order
Bathtub Installation- Old tub removal and disposal: We disconnect the drain and supply lines, cut the tub if needed, and haul it away. You don't have to deal with a 300-pound cast iron tub in your yard.
- New tub set and level: We set the new tub on a fresh bed of mortar or foam, level it, and secure it to the studs. A level tub prevents water pooling and cracks.
- Drain and overflow hookup: We install a new drain shoe, overflow gasket, and trip lever. We use plumber's putty and Teflon tape on all threaded connections to prevent leaks.
- Supply line connections: We connect the hot and cold supply lines to your tub filler or shower valve. If the old valves are seized, we replace them with new quarter-turn valves.
- Sealing and caulking: We apply a clean bead of silicone where the tub meets the wall and caulk the joints. This keeps water out of the wall cavity and prevents mold.
- Test and cleanup: We fill the tub, check for leaks, and run the shower. Then we clean up all debris and packaging. You get a ready-to-use tub and a tidy bathroom.
What the first visit covers
First visit
We measure the alcove, check the drain and valves, and note any floor issues.
Bathtub installation for homes
We handle tub installs for all types of Longview homes.
Standard tub swap
Same-size replacement, fast and clean.
Walk-in tub
Low entry with grab bars for safety.
Tub-to-shower
Convert your tub to a shower pan.
Soaker upgrade
Deeper tub for relaxation.
Bathtub installation for businesses
We work with property managers and facility owners across Longview.
Apartment units
Durable tubs for rental turnover.
Motels and hotels
Quick installs to minimize room downtime.
Assisted living
Walk-in tubs for resident safety.
bathtub installation longview WA done right
A proper tub install protects your home from water damage and gives you a bathroom that works. We do it right the first time.
Bathtub installation longview WA is the process of removing an existing tub or roughing in a new one, setting the drain and overflow, connecting the supply lines, and sealing everything watertight. It sounds simple until you hit a floor that's out of level or a drain that doesn't line up. We handle the whole job: demo, disposal, framing adjustments if needed, and final hookup. Most standard tubs take a full day; walk-in conversions can run two.
Longview homes, especially those built before 1980, often have cast iron tubs that weigh 300 pounds or more. Getting those out without cracking the floor tile takes experience. We also see a lot of galvanized supply lines that should be swapped to PEX while the wall is open. If you're searching for bathtub installation in longview WA near me, we're local and we've done hundreds of these across Cowlitz County.
- What it is
- Removing an old tub and installing a new one.
- When it helps
- When your tub leaks, cracks, or is hard to use.
- What you get
- A watertight tub that's ready to use.
How our bathtub installation works
We keep it simple. You get a clear plan, a tidy job site, and a tub that's ready to use the same day we finish.
Tools and methods we use
Each method answers a different question. Together they leave very little to guess.
For making secure connections on PEX supply lines. We use it when replacing old galvanized pipes.
For copper pipe connections. We use lead-free solder and protect surrounding surfaces with a heat shield.
For clearing clogs in the tub drain line before we install the new tub. We also use a hydro-jetter for tough blockages.
To ensure the new tub sits perfectly level. A level tub drains properly and prevents cracks.
When to schedule a tub install
Your old tub is cracked or leaking and you need a fast replacement.
We offer same day bathtub installation longview WA when our schedule allows.
HomesYou're remodeling your bathroom and want a new tub to match the tile.
We coordinate with your tile setter or handle the tub set and rough-in ourselves.
HomesA family member needs a safer bathing option due to mobility issues.
We install walk-in tubs with low entry, grab bars, and textured floors. We also add a handheld shower wand for easier rinsing.
HomesYou're a landlord with a rental unit that needs a durable, low-maintenance tub.
We install commercial-grade acrylic tubs that resist scratches and stains. They're easy to clean between tenants and hold up to daily use.
Businesses
How bathtub installation works in Longview
Longview's climate is damp, and that affects your bathroom. We see more mold and subfloor rot here than in drier parts of Washington. When we install a tub, we treat the subfloor with a mold-resistant coating and use silicone sealant that's rated for high humidity.
Downtown Longview
Many older homes with original cast iron tubs. We often need to reinforce the floor before setting a new tub.
Longview Heights
Sloping lots mean some homes have crawlspaces. We check for proper support under the tub area.
Pine Tree
A mix of mid-century homes. We frequently replace 54-inch tubs with 60-inch models to gain space.
- Downtown Longview
- Longview Heights
- Pine Tree
- Rolling Hills
From problem to finished result.
Slide to compare the photo with an illustrative inspection view. It is generated from the photo, not a measurement.
PhotoRusted cast iron to acrylic soaker
Before: A 1960s cast iron tub in Downtown Longview was rusted through near the drain. The subfloor was soft, and the drain leaked into the basement.
After: We removed the cast iron, replaced a 2-foot section of subfloor, and installed a 60-inch acrylic soaker. The drain was updated to PVC. Total job took 7 hours.
Walk-in tub for safer bathing
Before: An elderly homeowner in Longview Heights struggled to step over a 17-inch tub wall. She was afraid of falling and had stopped taking baths.
After: We installed a walk-in tub with a 4-inch threshold, grab bars, and a handheld shower. The project took two days, including a new drain line.
Tub-to-shower conversion
Before: A rental unit in Pine Tree had a cracked fiberglass tub that leaked into the unit below. The landlord needed a durable, low-maintenance fix.
After: We removed the tub, installed a shower pan and tile-ready walls, and added a new Moen shower valve. The job was done in three days.
Problems we solve with new tub installation
Old tubs cause more problems than most people realize. Here are the common issues we fix when we install a new one.
Leaking drain causing floor rot
A slow drip under the tub can rot the subfloor and joists. By the time you notice a soft spot, the repair can cost thousands.
Rust and stains that won't clean
A rusted tub looks dirty no matter how much you scrub. It also means the enamel is failing, which can harbor bacteria.
Difficulty stepping over high tub walls
A standard tub apron is 15 to 18 inches high. For someone with balance issues, that's a fall risk every time they shower.
Tub too small for the space
A cramped tub makes the whole bathroom feel tight. You can't stretch out, and the room feels dated.
Why upgrade your tub now
A new tub isn't just about looks. It's about safety, water efficiency, and stopping small leaks before they rot your subfloor.
Stop hidden water damage
Old tubs leak at the overflow gasket or the drain shoe.
Lower water bills
New tubs hold heat better and fill faster. If you switch to a low-flow filler, you can cut tub water use by 20-30%.
Safer entry and exit
Walk in bathtub installation longview WA is a smart move if you have trouble stepping over a 15-inch apron.
Add usable space
A tub that fits your bathroom makes the whole room feel bigger.
What you receive
Clear records you can keep and share.
Written quote
Price and scope before we start.
Install photos
Before and after shots of the work.
Care sheet
Simple tips to keep your tub in shape.
16 years of tub installs in Cowlitz County
Longview Riverbend Plumbing has been installing and replacing tubs since 2010. That's 16 years of working in Longview's older homes, from Downtown to Longview Heights.
Drain alignment
We check the drain location to see if it lines up with the new tub.
Subfloor condition
We probe for soft spots that need repair before setting the tub.
Valve operation
We test the shutoff valves to ensure they work and don't leak.
Is your longview area covered?
Type your ZIP code or town to check. If you are nearby and not listed, call and ask.
longview ZIP codes
- 98632
Towns we serve.
Based in longview and covering the places around it. Pick one for local details.
What Longview homeowners say
Our old cast iron tub was rusting through. Longview Riverbend pulled it out, patched the subfloor, and had a new acrylic tub in by 4 p.m. They even replaced the shutoff valves. The price was exactly what they quoted. No surprises.
We needed a walk-in tub for my father. The crew was patient, explained everything, and did a clean install. They sealed it perfectly and tested it twice before leaving. My dad loves it. Highly recommend for bathtub replacement longview WA.
I manage several rentals in Longview. Longview Riverbend has replaced tubs in three of my units. They're fast, tidy, and they don't overcharge. Tenants have been happy with the new tubs. I'll keep using them.
Frequently Asked Questions
Short answers for the first few minutes. The team can cover the rest.
Still have a question?
Describe what you are seeing and we will point you to the right next step.
(360) 886-3111The price depends on tub type, whether we need to move the drain, and if there's floor repair. We give you a written quote after a quick on-site measure.
A standard alcove tub swap takes 4 to 6 hours. If we're converting to a walk-in or moving the drain, plan on 8 to 10 hours, sometimes two days if tile work is involved. We'll tell you the timeline upfront so you can plan around it.
Yes. Bathtub replacement longview WA is one of our core services. We remove the old tub, dispose of it, and install your new one. We also handle the supply lines and drain hookup. If you're upgrading to a walk-in, we can do that too.
Acrylic alcove tubs are the most common because they fit standard 60-inch openings and hold heat well. Cast iron lasts longer but needs floor reinforcement. For older homes in Longview Heights or Downtown, a walk-in tub can be a safer choice if mobility is a concern. We'll help you pick based on your space and needs.
Related Services
Other services from the same team.
Ready for your new tub? Call us today
(360) 886-3111Call now and we'll schedule your on-site measure.
Contact Longview Riverbend Plumbing
Call us at (360) 886-3111 or email [email protected]. We answer the phone during business hours and run after-hours emergency calls for burst pipes and sewer backups. Most same-day appointments are booked before noon. Tell us what you are seeing and we will send the right plumber with the right parts.